Table of Contents
Advertisement
Receiving Faxes
Receiving a fax manually
Receiving Faxes
Activating TEL mode
{FAX/START} {AUTO ANSWER}
{DIGITAL SP-PHONE}
{C}
{SP-PHONE}
Set the fax machine to TEL mode by pressing
{AUTO ANSWER} until the following is
displayed.
TEL MODE
62
{STOP}
ON
OFF
How to receive calls using the
base unit
1
When the fax machine rings, press
{ { { { DIGITAL SP-PHONE} } } } or lift the handset
and press { { { { C
C } } } } or { { { { SP-PHONE} } } } to answer
C
C
the call.
2
When document reception is required, a fax
calling tone (slow beep) is heard, or no
sound is heard, press { { { { FAX/START} } } } .
L The unit will start fax reception.
How to receive calls using the
handset
To use this feature, you must set the remote fax
activation to on (feature #41 on page 93)
beforehand.
1
When the fax machine rings, lift the
handset and press { { { { C
2
When document reception is required, a fax
calling tone (slow beep) is heard, or no
sound is heard, press { { { { * * * * }{ }{ }{ }{# # # # }{ }{ }{ }{9} } } } (pre-
selected fax activation code) firmly.
L A single beep will be heard.
L The unit will start fax reception.
Note:
L You can change the fax activation code in
feature #41 (page 93).
L If you do not answer the call within 10 rings,
the unit will temporarily activate the
answering device. The greeting message will
then be played and the other party can then
send a fax.
To stop receiving
Press { { { { STOP} } } } .
CONNECTING.....
C } } } } or { { { { SP-PHONE} } } } .
C
C
Advertisement
Table of Contents
