Lcd Bezel Removal - Packard Bell EasyNote LS11HR Service Manual

LCD Bezel Removal

Prerequisite:
LCD Module Removal
1.
Remove two (2) screw pads and two (2) screws (A).
A
Figure 3-36. LCD Panel
2. Starting from bottom edge of bezel, pull bezel up and away from panel.
3. Work along right side toward top of bezel, pulling covers apart.
4. Continue along top edge and down left side to remove bezel (Figure 3-37).
Figure 3-37. LCD Bezel Removal
Machine Maintenance Procedures
0
A
3-39