Removing The Lcd Bezel - Packard Bell ENTK36 Series Service Manual

Removing the LCD Bezel

1. See "Removing the LCD Bezel" on page 85.
2. Remove the two bezel screw caps and screws.
Step
LCD Bezel
3. Starting from the bottom edge of the bezel, pry the bezel upwards and away from the panel. Work along the
side toward the top of the bezel, prying the covers apart. Continue along the top edge and down the other side
to remove the bezel.
NOTE: If necessary, use a pry to lift up the outside edges of the bezel.
Chapter 3
Size
M2.5*6
Quantity
2
Screw Type
85