Using The Lan Mac Eeprom Utility - Packard Bell EasyNote LS11HR Service Manual

Input:
e. Write Asset Tag to EEPROM
Input:
NOTE: NOTE:
For examples b) through e), restart the system to
EEPROM

Using the LAN MAC EEPROM Utility

Use MAC.BAT utility to write the MAC.CFG file to EEPROM under DOS mode.
1. Use a text editor to open and edit the MAC.CFG file. (Figure 2-23)
Figure 2-23. MAC.CFG File
2. In DOS mode, run MAC.BAT to write MAC values to EEPROM.
System Utilities
dmitools /wu
dmitools /wa Packard Bell Asstag
.
MAC.CFG - Notepad
MAC.CFG - Notepad
File Edit Format View
Title= MAC Address byte
WriteData='001122334455'
StartAddr=7A
WriteLeng=6
KeepByte=0
Table 2-5. MAC.cfg Field Names & Values
Field Name
Title MAC Address byte
WriteData '001122334455'
StartAddr 7A
WriteLeng 6
KeepByte 0
write any changes in the data to the
Help
Value Description
N/A
MAC value
MAC address
MAC value length
N/A
(Figure 2-24)
2-21
0
0
0