Cut Last - SATO E series Programming Manual

Command Structure
Command Function
Input to Printer
Printer Output
Special Notes
Page 2-26

Cut Last

<ESC>~B
Example: <ESC>~B
Placement: Separate data stream sent to the printer
Default: None
To control the cutting of labels when using a SATO cutter unit with the
printer. This command allows the cutting of a printed multi-part tag or label
that is left in the printer after a job is cut.
<ESC>A
<ESC>~B
<ESC>Z
This command will feed the last printed label to the cut position, cut the
label and then back feed to the head position in preparation for printing
the next job.
1. You must have the optional printer Cutter to use this function. Contact
your SATO representative for more information.
Section 2: Command Codes
SATO Programming Reference