Setting Cruise Control - Chevrolet 2009 Corvette Owner's Manual

9 (Off): Turns the system off.
R
(On): Turns the system on.
+ (Resume/Accelerate): Use to make the vehicle
accelerate or resume a previously set speed.
T
(Set): Press this button at the end of the lever to
set the speed.
The vehicle has cruise
control.

Setting Cruise Control

CAUTION:
{
If you leave your cruise control on when you are
not using cruise, you might hit a button and go
into cruise when you do not want to. You could be
startled and even lose control. Keep the cruise
control switch off until you want to use cruise
control.
1. Move the cruise control switch to on.
2. Get up to the speed desired.
T
3. Press at the end of the lever and release it.
4. Take your foot off the accelerator pedal.
When the cruise control is engaged, the CRUISE SET
TO XX MPH message displays on the Driver Information
Center (DIC). See Other Messages on page 3-70.
3-11