Setting Cruise Control - Chevrolet Malibu 2021 Getting To Know Your

CRUISE CONTROL

SETTING CRUISE CONTROL

On/Off button. The Cruise
1. Press the
Control symbol will illuminate in white on
the instrument cluster.
2. When traveling at the desired speed,
press the SET– button to set the speed.
The symbol will illuminate in green on the
instrument cluster.
ADJUSTING CRUISE CONTROL
RES+ Resume/Accelerate
Press the RES+ button to resume a set speed. When the system is active, press the
button to increase speed.
SET– Set/Coast
When the system is active, press the SET– button to decrease speed.
Cancel
Press to cancel the Cruise Control without erasing the set speed from memory. Pressing
the brake pedal also will cancel the Cruise Control.
ADAPTIVE CRUISE CONTROL
The system enhances regular cruise control to maintain a following gap — the time
between your vehicle and a vehicle detected directly ahead — by accelerating or braking
automatically while you continue to steer.
Following Gap button to select a gap setting of Far, Medium or Near.
Press the
This is also the Forward Collision Alert
Press and hold the
and Adaptive Cruise Control.
INTELLIBEAM LIGHTING SYSTEM
The IntelliBeam system automatically turns the high-beam headlamps on/off based on
traffic conditions when the system is activated, indicated by a green
instrument cluster. A blue
To enable the system, press the
the exterior lamps control in the AUTO or
Note: IntelliBeam activates the high-beam headlamps only when driving over 25 mph.
12
Optional equipment
F
F
setting.
F
Cancel button to switch between
indicator appears when the high-beam headlamps are on.
IntelliBeam button on the turn signal lever with
regular Cruise Control
See Driving and Operating in your Owner's Manual.
F
Headlamps position.
See Lighting in your Owner's Manual.
indicator on the