Setting Cruise Control; Driver Assistance Systems - Chevrolet MALIBU 2019 Quick Reference Manual

CRUISE CONTROL

SETTING CRUISE CONTROL

On/Off button. The Cruise
1. Press the
Control symbol will illuminate in white on
the instrument cluster.
2. When traveling at the desired speed,
press the SET– button to set the speed.
The symbol will illuminate in green on the
instrument cluster.
ADJUSTING CRUISE CONTROL
RES+ Resume/Accelerate
Press the RES+ button to resume a set speed. When the system is active, press the
button to increase speed.
SET– Set/Coast
When the system is active, press the SET– button to decrease speed.
Cancel
Press to cancel the Cruise Control without erasing the set speed from memory. Pressing
the brake pedal also will cancel the Cruise Control.
ADAPTIVE CRUISE CONTROL
The system maintains the Cruise Control set speed and a following gap — the time
between your vehicle and a vehicle detected directly ahead — by accelerating or braking
automatically while you continue to steer.
Following Gap button to select a gap setting of Far, Medium or Near.
Press the
This is also the Forward Collision Alert
Press and hold the
and Adaptive Cruise Control.

DRIVER ASSISTANCE SYSTEMS

Safety or driver assistance features are no substitute for the driver's responsibility to operate
the vehicle in a safe manner. The driver should remain attentive to traffic, surroundings and road
conditions at all times. Read your Owner's Manual for important feature limitations and information.
TRACTION CONTROL AND STABILITRAK
wheelspin and the StabiliTrak electronic stability control system assists with directional
control of the vehicle in difficult driving conditions. Both systems turn on automatically
every time the vehicle is started. Traction control should be turned off if the vehicle is
stuck and rocking the vehicle is required.
To turn traction control on or off, press the
on the center console.
REAR VISION CAMERA
vehicle displays on the infotainment screen. Vehicle speed must be below 8 mph.
12
Optional equipment
F
F
Cancel button to switch between
— The full-time traction control system limits
— When the vehicle is in Reverse, a view of the area behind the
setting.
F
See Driving and Operating in your Owner's Manual.
Traction Control/StabiliTrak Off button
regular Cruise Control