Perkins 103-06 Workshop Manual page 16

Connecting Rod and Piston
A. Loosen connecting rod nuts and remove rod
cap.
B. Remove carbon from cylinder bore. Push piston
and connecting rod through cylinder block.
Replace rod cap to piston assembly.
Flywheel Assembly
A. Loosen bolts, remove flywheel.
Back Plate
A. Loosen two starter retaining nuts; remove starter.
B. Loosen back plate retaining bolts and remove
back plate.
Remove Oil Seal
Crankshaft and Main Bearing Assembly
PB020
A. Remove bolts fitted through crankcase cross
members.
B. Slide out crankshaft and main bearing assembly.
Remove Relief Valve Assembly
PB022
PB023
PB024