Perkins 103-06 Workshop Manual page 15

Crank Pulley
A. Loosen pulley nut and remove pulley.
Oil Filter
A. Remove spin-on type oil filter and discard.
Gear Cover and Governor Assembly
A. Remove securing bolts and lift cover assembly off
the locating dowels.
Idler Gear and Oil Pump Assembly
A. Remove circlip. Remove entire assembly.
Camshaft Assembly, Tachometer Drive
A. Using access hole in cam gear, remove keeper
plate.
B. Slide cam shaft with fly weight retainer out of
camshaft bore.
C. Pull tachometer drive shaft from its bore.
Front End Plate Assembly
A. Remove retaining bolts and lift front plate off its
locating dowels. Remove joint and discard.
Dipstick Assembly
A. Loosen fixing bolt and remove assembly. Oil
Sump
A. Remove all bolts, lower sump and discard joint.
Suction Pipe and Strainer
A. Remove two securing bolts. Rotate suction pipe
out of its bore.
PBO1
5
Plate
Camshaft
PBO16
PB017
PB019