Advertisement
5. Switch Check (3)
Page 2
Addresses 55, 56
Using method:
1) Select page: 2, addresses: 55, 56.
2) By discriminating the display data, the pressed key can be
discriminated.
Address
00 to 12
55
CONTROL DOWN
(KEY AD1)
(PK-61 board) (PK-61 board) (PK-61 board)
(IC404 ul)
(S701)
56
CONTROL RIGHT CONTROL LEFT CONTROL SET
(KEY AD2)
(PK-61 board) (PK-61 board) (PK-61 board) (PK-61 board) (PK-61 board) (PK-61 board) (PK-61 board)
(IC404 i;)
(S701)
6. LED Check
Page 2
Address 06
Using method:
1) Select page: 2, address: 06, and set data: 02.
2) Check that all LED except for the ACCESS LED are lit.
3) Select page: 2, address: 06, and set data: 00.
7. Self Diagnosis Code
Display Code
Countermeasure
Change the disk and turn off the main
C:32:01
power then back on.
Replace the floppy disk or "Memory
Stick".
C:13:01
Format the floppy disk or "Memory
Stick" with the MVC-FD100/FD200.
Checking of flash unit or replacement of
E:91:01
flash unit
E:61:00
Checking of lens drive circuit
E61:10
Note : The error code is cleared if the battery is removed, except defective flash, unit.
*1: When the flash charging failed, Page: D, Address: 67, Data: 04 are written.
After repair, be sure to write Page: D, Address: 67, Data: 00.
[Power supplying Method]
Use the AC power adaptor (AC-L10A) when supplying the power to this set.
13 to 3A
3B to 62
CONTROL UP
DISPLAY
(S701)
(S702)
(S701)
(S701)
Data 02
Defective floppy disk.
• The type of floppy disk that cannot be
used by this machine, is inserted.
(Such as 2DD)
• Data is damaged.
• Unformatted disk or "Memory Stick"
is inserted.
Abnormality when flash is being
charged.
When failed in the focus initialization.
5-47 E
5-47
MVC-FD100/FD100H/FD200/FD200H
Data
63 to 87
88 to B3
FLASH
PROGRAM AE LCD BACK LIGHT (OFF) LCD BACK LIGHT (ON)
(S705)
(S707)
Cause
*1
B4 to E0
E1 to FF
FOCUS
(PK-61 board)
No key input
(S711)
(S709)
(S709)
Caution Display During Error
DRIVE ERROR
DISK ERROR
MEMORY STICK ERROR
Flash LED
Flash display
Flashing at 3.2 Hz
—
Advertisement
