Advertisement
5-1. CAMERA SECTION ADJUSTMENTS
1-1.
PREPARATIONS BEFORE ADJUSTMENT
1-1-1.
List of service tools
• Oscilloscope
• Digital voltmeter
Ref. No.
J-1
Filter for color temperature correction (C14)
J-2
Pattern box PTB-450
J-3
Color bar chart for pattern box
J-4
Siemens star
J-5
Adjusting remote commander (RM-95 upgraded) (Note2)
J-6
Clear chart for pattern box
J-7
CPC-12 jig
J-8
Alignment disk (Two disks as a pair)
J-9
Cleaning disk (OR-D29WA)
Cleaning disk
J-10
Mini pattern box
J-11
Power supply cord (DC)
Note 1: Usage and operating note
One or two seconds of momentary use of cleaning disk is
sufficient such that FD is accessed momentarily by system
control when the main power is turned on. After cleaning,
insert a FD for playback. When cleaning is insufficient,
use a cleaning disk again.
Caution: Avoid using a cleaning disk excessively. Head
can be broken.
J-1
J-2
J-6
J-7
J-11
• Regulated power supply
• Vectorscope
Name
TFD2-1(+)
TFD2-2(–)
J-3
J-8
MVC-FD100/FD100H/FD200/FD200H
• AC power adaptor (AC-L10A)
• Color monitor
Parts Code
J-6080-058-A
Auto white balance adjustment/check
White balance adjustment/check
J-6082-200-A
J-6020-250-A
J-6080-875-A
For checking the flange back
J-6082-053-B
J-6080-621-A
J-6082-436-A
For connecting the adjustment remote commander
For adjusting the LCD block
8-967-990-01
Dynamic inspection disk with LCD adjustment signal
8-967-990-11
8-960-009-39
FDD head cleaning (Note 1)
Available on market
J-6082-353-B
For adjusting the flange back
J-6082-223-A
For the battery down adjustment
Note 2: If the microprocessor IC in the adjusting remote
commander is not the new microprocessor (UPD7503G-
C56-12), the pages cannot be switched.
In this case, replace with the new microprocessor (8-759-
148-35).
J-4
J-9
Fig. 5-1-1
5-3
Usage
J-5
J-10
Advertisement
