Using The Phone; Control Key - Siemens Gigaset S790 Manual

Gigaset S790/S795 / USA-CAN EN / A31008-M2121-R301-1-3S19 / starting.fm / 28.07.2009

Using the phone

Using the phone

Control key

20
Below, the side of the control key that you must press in the
respective operating situation is marked in black (top, bot-
tom, right, left, center), e.g., v for "press right on the control
key" or w for "press the
The control key has a number of different functions:
When the handset is in idle status
s
Open the directory.
v
Open the main menu.
u
Open the list of handsets.
t
Call up the menu for setting the handset's call volume
¢
( page 53).
In the main menu
t, s, v or u
Navigate to the required function.
In submenus and lists
t / s
Scroll up/down line by line.
In input fields
Use the control key to move the cursor up t, down s, right v or left u.
Press and hold v or u to move the cursor word by word.
During an external call
s
Open the directory.
u
Initiate an internal consultation call.
t
Adjust the volume for earpiece and speaker mode.
Functions when pressing the middle of the control key
Depending on the operating situation, the key has different functions.
u
In idle status the key opens the main menu.
u
In submenus, selection and input fields, the key takes on the function of
the display keys ,
§OK§
Please note
These instructions demonstrate the main menu being opened by pressing
the right of the control key and functions being actuated by pressing the
appropriate display key. However, if you prefer, you can use the control key
as described above.
center of the control key".
, , or
§Yes§ §Save§ §Select§ §Change§
.