Lexmark W820 Service Manual page 215

Removal
1.
Open the Front Cover.
2.
Remove the screw securing the plastic strap to the printer frame and free the strap.
3.
Remove the screw securing the metal hinge to the printer frame.
4.
Slide the Front Cover to the right to free the Front Cover right hinge from the frame
and the metal hinge from the frame, and remove the Front Cover.
Replacement
1.
Position the Front Cover as shown.
2.
Slide the Front Cover left pivot into the metal hinge.
3.
Reinstall the Front Cover by first sliding the pivot hole on the right side of the Cover
onto the right hinge on the printer frame.
4.
Reinstall the left side of the cover by positioning the metal hinge against the printer
frame and inserting the metal tab on the hinge into the cutout in the frame.
5.
Use one screw to secure the metal hinge to the printer frame.
6.
Open and close the Front Cover to make sure both the left and right hinges are
working smoothly.
7.
Reinstall the plastic strap to the printer frame and use one screw to secure the strap
to the frame.
4025-XXX
4-7
Repair Information