Mounting The Motor Unit - Canon iR2200 Service Handbook

2.2 Mounting the Motor Unit

1) Engage the pulley [2] of the motor unit
[1] with the belt [3].
2) Using two screws [4], mount the motor
unit [1] temporarily.
3) Fit the spring [5] to apply tension to the
belt [3].
4) Check to make sure that the belt [3] is
vertical.
5) While taking care not to hold the scan-
ning lamp [1] or the reflecting shade
[2], move the No. 1 mirror base [3] back
and forth two to three times to make a
check once again.
6) Tighten the two screws to secure the
motor unit in place.
CHAPTER 3 STANDARDS AND ADJUSTMENTS
[4]
[3]
[2]
[6]
F03-202-01
[2]
F03-202-02
[1]
[5]
[3]
[1]
3-7