Duplex Feeding Unit; Adjusting The Image Leading Edge Margin; Adjusting The Left/Right Non-Image - Canon iR2200 Service Handbook

1.3.4 Duplex Feeding Unit

1) Adjust the image margin as indicated using service mode: COPIER>ADJUST>FEED-
ADJ>ADJ-REFE.

1.4 Adjusting the Image Leading Edge Margin

1) Adjust the image margin in service mode so that it is as indicated:
COPIER>ADJUST>FEED-ADJ>REGIST.
1.5 Adjusting the Left/Right Non-Image Width
1) Adjust the non-image width in service mode so that it is as indicated:
COPIER>ADJUST>ADJ-XY>ADJ-Y.
Decreasing the ADJ-Y setting
(A decrease by '10' will
decrease the margin by 1 mm.)
CHAPTER 3 STANDARDS AND ADJUSTMENTS
Decreasing the REGIST setting
(A decrease by '10' will increase the margin by 1 mm.)
Edge of paper
Increasing the REGIST setting
(An increase by '10' will decrease the margin by 1 mm.)
F03-104-01
Edge of image
Increasing the ADJ-Y setting
(An increase by '10' will increase
the non-image width by 1 mm.)
2.5mm±1.5 <2.5 ± 2.0 mm>
0
2
4
6
8
< >: when the DADF-H1 picks up
10
F03-105-01
an original (in stream readig
mode).
3-5