CHAPTER 1 MAINTENANCE AND INSPECTION
5 Points to Note for Scheduled Servicing
Unless otherwise indicated, use lint-free paper and alcohol.
•
•
•
Reflecting shade
Cleaning (blower brush)
No. 1 through No. 3 mirrors
Cleaning (blower brush)
Developing assembly bottom
Cleaning
Inlet guide (upper/lower)
Cleaning (solvent)
1-8
If you used solvent, check to make sure that the solvent has dried before
mounting the component back into the machine.
Unless otherwise specified, do not use a moist cloth for cleaning.
Provide scheduled servicing at the specified intervals.
Original size sensor
Cleaning (blower brush)
Scanner rail
Lubricating
Scanner cable
Check
Waste toner case
Checking, disposing
(Remove waste toner, and then clean the
toner case, Replace the toner case, if any.)
F01-500-01
Lens
Cleaning (blower brush)
Copyboard glass
Cleaning
Bending mirror
Cleaning (special tool)
Developing assembly base
Dry wiping
Feeding assembly base
Cleaning
Pre-registration guide
Cleaning (paper lint)
Transfer guide
Cleaning