Canon iR2200 Service Handbook page 30

CHAPTER 3 STANDARDS AND ADJUSTMENTS
2) Fit the pins of the mirror positioning
tool (front [2], rear [3]) into the holes
[1] of the rail and the No. 1/No. 2 mir-
ror base. The No. 2 mirror base is ad-
justed in keeping with the back-and-
froth movement of the cable fixing
plate.
Front Side (F marking)
Rear Side (R marking)
3) Fix the end of the cable (which is tem-
porarily secured on the hook of the
reader frame) in place using the spring.
4) Fully tighten the screw on the cable fix-
ing plate.
5) Fully tighten the screw on the cable fix-
ing so that it is secured on the No. 1
mirror base.
6) Detach the mirror positioning tool (2
pc.).
3-10
[2]
[1]
F03-204-03
[3]
F03-204-04
[1]