Manual Reception - Kyocera TASKalfa 1801 Operation Manual

Using a Connected Telephone > Manual Reception

Manual Reception

Use this method when you want to receive originals after talking to the person at the sending system.
1
2
3
4
NOTE
FAX Automatic Reception has been preset for the receiving mode of this machine. To use
Manual Reception, you need to change the receiving mode to Manual Reception. To change
to manual mode, refer to
The telephone rings.
When there is an incoming call, the telephone connected to the machine makes a ringing tone.
Lift the handset.
Lift the handset of the telephone.
Check if the telephone line has connected to the fax of the sending
system.
If the destination is a fax machine, you will hear soft beep sounds. If a person answers, you
can talk to that person.
Press the [On hook] key.
1
Press the [FAX] key.
2
Press the [On hook] key.
RX Settings on page 9-5.
7-7