Fax Settings > Account Management
Account Management
There is job accounting that controls the usage per account.
In job accounting, the status of fax use per account can be known for up to 30 accounts for sending of originals and
making communication reservation after entering Account ID. For each management method, refer to the machine's
Operation Guide.
Description of Job Accounting
Item
Registration of Account
Enable/Disable job
accounting
FAX send restriction
Counting of the number of
used sheets
Print of Accounting
Report
NOTE
For details, refer to the machine's Operation Guide.
Communication modes subject to job accounting
•
Normal transmission
•
Delayed transmission
•
Manual send when dialed from this machine to the receiving system
•
Sending Faxes from PC
Restriction of use function
When you have enabled job accounting, you need to enter an Account ID when performing the
following operations.
•
Normal transmission
•
Delayed transmission
•
Manual send when dialed from this machine to the receiving system
•
Sending Faxes from PC
Normally, the Local FAX Name is printed in the transmit terminal identification (TTI). However,
when job accounting has been enabled, and you send originals after entering an Account ID,
the Account Name is printed.
Register Account Name and Account ID. Up to 8 digits can be entered.
Enable job accounting.
Restricts the number of fax sheets that can be sent. You can prohibit the
use of this sending function or cancel the sending restriction.
You can reset the counting, referring to the number of fax sheets to be
sent and the time required for sending fax by all the accounts or by
account.
You can print the printed and sent page numbers that have been counted
by all the accounts.
9-17
Description