Fax/Tel Auto Switch Reception - Kyocera TASKalfa 1801 Operation Manual

Using a Connected Telephone > FAX/TEL Auto Switch Reception

FAX/TEL Auto Switch Reception

This reception method is convenient when using both telephone and fax on a single telephone line. When fax originals
have been sent, the machine automatically receives them, and when the other party is calling from a telephone, the
machine makes a ringing tone urging the user to respond.
IMPORTANT
In order to use FAX/TEL Auto Switch Reception, it is necessary to connect a
telephone set (commercially available product) to the machine.
After the telephone has made a ringing tone for the preset number of times, the other
party is required to pay phone line charges even if the receiving system does not
respond.
Flow of reception
FAX
When the other party has sent originals with
automatic send
Receives incoming call without making ringing tone.
(The other party is required to pay the phone line charge from this point.)
Receive originals from the other party
automatically (FAX Automatic Reception)
Preparation:
Refer to
RX Settings on page 9-5
When the other party is calling from a telephone
Makes ringing tone twice.
(Only the other party can hear the ringing tone.)
Makes ringing tone. (Both the other party and the
within 30 seconds, the machine switches to fax
When you lift the handset of the connected
telephone set, you can talk to the other party.
to select [Auto(FAX/TEL)].
7-2
Telephone
receiving machine can hear the ringing tone.)
(If you do not lift the handset of the telephone
reception.)