Repeater Detail Screen - Icom IC-7100 Advanced Instructions

Previous view
9
D-STAR OPERATION <ADVANCED>

Repeater detail screen

According to the programmed contents, such as posi-
tion data, UTC offset, and so on, the distance between
your position and the repeater or repeater time can be
displayed on the REPEATER DETAIL screen.
The Detail screen can also be entered in the
SELECT" screen.
Push (C) to enter the DR mode.
q
DR
• The DR mode is selected.
Touch the "TO" field.
w
Touch "Gateway CQ."
e
Touch the repeater group.
r
• Example: "11: Japan"
Touch the repeater for 1 second.
t
• Example: "Hirano"
Touch "Detail."
y
• The REPEATER DETAIL screen is displayed.
Touch [ ](D) to return to the RPT LIST screen.
u
L eft D isplay R ight
C enter
While in the DR mode, and if you set the repeater as
shown to the right, the repeater details screen can be
displayed.
Touch (C) or touch the repeater for 1 sec-
q
QUICK
ond to open the quick menu screen.
Touch "Repeater Detail."
w
• The REPEATER DETAIL screen is displayed.
Repeater is set in "FROM"
"Repeater Detail" is selected
FROM
"
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch screen)
Example: Shows the "Hirano" repeater detail screen
Sub name
Repeater name
Direction from
your position*
Group number
* When the position data accuracy level is set to "Approxi-
mate," direction data is not displayed if the distance to the
repeater is under 5 kilometers.
9-44
Touch the
"TO" field.
Touch
"Gateway CQ."
Touch the re-
peater group.
Example:
"11:Japan."
Touch the
repeater for
1 second.
Example:
"Hirano."
Touch
"Detail."
Call sign
Duplex setting
Repeater
frequency
Distance from
your position
Repeater time Return to the
RPT LIST screen.