If Filter Selection; D Filter Passband Width Setting - Icom IC-7100 Advanced Instructions

Previous view
5
FUNCTIONS FOR RECEIVE

IF filter selection

The transceiver has 3 passband width IF filters for each
mode.
The filter selection is automatically memorized in
each mode.
The PBT shift frequencies are automatically memo-
rized in each filter.
D IF filter selection
On the Mode selection screen, select the desired
q
mode. (p. 3-17)
Touch the Filter icon one or more times to select IF
w
filter 1, 2 or 3.
• The selected passband width and filter number is dis-
played as the Filter icon.

D Filter passband width setting

(Mode: SSB/CW/RTTY/AM)
On the Mode selection screen, select the desired
q
mode. (p. 3-17)
• Passband widths for FM, WFM and DV modes are fixed,
and cannot be set.
Touch the Filter icon for 1 second to display the "FIL-
w
TER" screen to set the filter passband width.
Touch the Filter icon one or more times to select IF
e
filter 1, 2 or 3.
Touch [BW]( D), then rotate the Dial to adjust the de-
r
sired passband width. Then touch [BW](D) to set it.
• If desired, touch [DEF](D) for 1 second to reset to the
default setting.
If desired, select another mode (any other than the
t
FM, WFM or DV), then repeat steps w and r.
Push (C) to exit the "FILTER" screen.
y
MENU
Mode IF filter
FILTER1 (3.0 kHz)
SSB FILTER2 (2.4 kHz)
FILTER3 (1.8 kHz)
FILTER1 (1.2 kHz)
SSB-D
FILTER2 (500 Hz)
CW
FILTER3 (250 Hz)
FILTER1 (2.4 kHz)
RTTY FILTER2 (500 Hz)
FILTER3 (250 Hz)
FILTER1 (9.0 kHz)
AM
FILTER2 (6.0 kHz)
AM-D
FILTER3 (3.0 kHz)
FILTER1 (15 kHz)
FM
FM-D FILTER2 (10 kHz)
DV
FILTER3 (7.0 kHz)
WFM FILTER (280 kHz)
Adjustable range (steps)
50 to 500 Hz (50 Hz)
600 Hz to 3.6 kHz (100 Hz)
50 to 500 Hz (50 Hz)
600 to 3600 Hz (100 Hz)
50 to 500 Hz (50 Hz)
600 to 2700 Hz (100 Hz)
200 Hz to 10 kHz (200 Hz)
Fixed
Fixed
L eft D isplay
C enter
When FILTER2 or FILTER3 is selected in the FM
mode, the TX modulation changes to the narrow
mode (2.5 kHz).
Filter icon
Passband width and shift value
• "FILTER" screen display
• While adjusting the passband width
Blinks Highlighted
The PBT shift frequencies are cleared when the
passband width is changed.
This "FILTER" screen graphically displays the PBT
shift frequencies and passband width.
5-6
The L, R, C or D in the
R ight
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch screen)
Touch [BW]
Rotate the Dial to
adjust the pass-
band width, and
then touch [BW]
Highlighted