Icom IC-7100 Advanced Instructions page 266

Previous view
13
USING AN SD CARD
Loading the saved settings file that are on the SD card (Continued)
Touch [YES]( D) to start the file check.
y
• While checking the file, "CHECKING FILE" and a prog-
ress bar are displayed.
After checking, settings data loading begins.
u
• While loading, "LOADING" and a progress bar are dis-
played.
After loading ends, "COMPLETED!" appears.
i
To complete the loading, reboot the transceiver.
L eft D isplay
C enter
Appears only when "ALL" or "Select"*
is selected in the LOAD FILE screen,
* If "Select" is selected, only when the
"REF Adjust" check box is checked.
13-9
The L, R, C or D in the
R ight
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch screen)