Setting Frequency; D Tuning With The Dial - Icom IC-7100 Advanced Instructions

Previous view
3
BASIC OPERATION

Setting frequency

You can select the transceiver's frequency by using the
Dial, or you can enter it on the Direct input screen.

D Tuning with the Dial

q On the Band selection screen, select the desired fre-
quency band. (p. 3-6)
w Rotate the Dial to set the desired frequency.
• The default tuning step differs, depending on the operat-
ing mode, frequency band and a version.
If the frequency cannot be changed:
Check the Lock function, and if it is ON, "
played, and the Dial does not function.
In this case, hold down
turn OFF the Lock function.
When "LOCK/SPEECH" is selected in the "[SPEECH/
LOCK] Switch" item of the "Function" Set mode, push-
ing [SPEECH/LOCK] turns OFF the lock function. (see
p. 17-20 for details)
(C) > Function > [SPEECH/LOCK] switch
SET
" is dis-
(R) for 1 second to
SPEECH
L eft D isplay
C enter
3-7
Dial
The L, R, C or D in the
R ight
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch screen)