Ricoh Aficio 3260C Operating Instructions Manual page 68

User Tools (System Settings)
❖ ❖ ❖ ❖ Output: Printer
You can specify a tray to which prints are delivered.
4
Note
❒ Default: Copy Tray, Finisher Upper Tray
❒ The output trays set on the printer driver have priority over the output tray
specified above.
❒ The default settings may vary depending on the finisher installed.
❖ ❖ ❖ ❖ ADF Original Table Elevation
You can set the timing for elevating the ADF original table.
Note
❒ Default: When Original is Set
❖ ❖ ❖ ❖ Job List Display Time
You can set the length of time that the job list display is shown before the dis-
play reverts back to the default screen.
Note
❒ Default: 15 seconds
❖ ❖ ❖ ❖ <F/F4>Size Setting
Currently three types of F size are available: 8
8"×13"L. The ADF or exposure glass cover sensor cannot distinguish these
three types of originals. This function sets the F size from the ADF or expo-
sure glass cover sensor. Auto Paper Select or Auto Reduce / Enlarge can be
used for F size originals based on this setting.
56
AFU046S
1 1
/ "×13"L, 8 / "×13"L and
2 4