6 ] Each Image Set (Code 48) - Brother MFC-9420CN Service Manual

[ 6 ] Each Image Set (Code 48)

Function
This function is to re-set the total number of images of each color in the NVRAM.
Always implement the operation when replacing the engine control board.
Operating Procedure
(1) Select Each Image Set with using the 4 or 5 key in the initial stage of the factory mode.
After selecting, press the 6 key.
The "48 IMAGE OF / ► Y / M / C / K" appears on the LCD.
(2) Select the color to be set and press the 6 key.
Enter the value onto the blinking digit.
Move the cursor onto the digit to be entered with using the 4 or 5 key.
Enter the value with using the 6 key.
After entering the setting value, move the cursor onto SET with using the 4 or 5 key.
Press the 6 key to register the setting value.
(3) Press the 3 key, and the machine returns to the initial stage of the factory mode.
8 -4 6 Confidential