5.1.23 Waste Toner Auger PU
(1) Remove the setscrew (BT3x8, 2 pieces) of the waste toner auger PU.
(2) Remove the waste toner auger PU from the frame.
NOTE:
• In this instance, do not cause the waste toner fall on the floor.
If the installation part is stained, clean it off with the vacuum cleaner that is for the toner
•
only or with cloth.
5.1.24 Waste Toner Agitator PU
(1) Remove the coupling gear from the inside of the frame.
(2) Pull out the waste toner agitator PU.
BT3x8
Waste toner auger PU
Fig. 5-67
Coupling gear
Waste toner agitator PU
Frame
Fig. 5-68
5 -4 2
BT3x8
Frame
Confidential