Selecting And Connecting A Printer (Os X 10.2/10.3); Configuring The Rendezvous Settings - Olivetti d-Color MF551 Printing Manual

5
5.1.3

Selecting and connecting a printer (OS X 10.2/10.3)

In OS X 10.2/10.3, the printer can be connected with Rendezvous, AppleTalk, LPR (LPD), or IPP.
After configuring the network setting for the machine, selecting this machine as the printer to be used in
"Printer Setup Utility" or "Print Center" enables printing.

Configuring the Rendezvous settings

Configuring the Bonjour settings for the machine
Enable Bonjour in "Bonjour Setting" for the machine, and then enter the Bonjour name.
d
Reference
For details on the Bonjour settings for the machine, refer to the "User's Guide [Network Administrator]".
Adding a printer
1
Select "HDD" - "Applications" - "Utilities" where the driver was been installed, and then double-click
[Printer Setup Utility] or [Print Center] to open it.
2
When the "Add Printer" window appears, click [Add]. When the printer list appears, click [Add].
% If available printers have already been specified, the "Add Printer" window does not appear.
3
Select "Rendezvous" for the connection method.
Connected printers are detected.
% If no printer is detected, turn your printer off then on again.
In this case, turn off the printer, and then wait approximately 10 seconds before turning it on again.
If you turn the printer on immediately after turning it off, it may not function correctly.
4
From the "Name" list, select the desired model name.
The printer driver corresponding to the selected printer name is automatically selected.
% After the printer driver is selected, go to Step 6.
% If an incorrect printer driver is selected, go to Step 5.
5
Select the desired printer driver manually.
% From "Printer Model", select "GENERIC", and then select the desired model from the list of model
names.
6
Click [Add].
When the selected printer is registered in the "Printer List", the setting procedure is completed.
5-10
Mac OS X 10.2/10.3/10.4/10.5
d-Color MF651/551
5.1