Logging In To The Administrator Mode - Olivetti d-Color MF551 Printing Manual

13
Reference
- If account track is enabled, enter the account name and password.
- Clicking [User List] allows you to select a user name from the list.
- If external server authentication is enabled, select a server.
- To log in as the administrator in the user mode, select [Administrator] - "Administrator (User Mode)",
and then enter the administrator password.
- If "Prohibited Functions When Authentication Error" in Administrator Settings is set to Mode 2 and a
user enters an incorrect password the specified number of times, that user is locked out and can no
longer use the printer. Contact your administrator to cancel operation restrictions.
- [User List] is available only when "User Name List" is set to "ON". For details, refer to the "User's Guide
[Copy Operations]".

Logging in to the administrator mode

To configure the system and network settings, log in to the administrator mode.
%
In the login page, select "Administrator", and then click [Login].
% Enter the administrator password in the page that appears, and then click [OK].
Reference
- When logged in to the administrator mode, the control panel of the machine is locked and cannot be
used.
- Depending on the status of the machine, you may not be able to login to the administrator mode.
- If "Prohibited Functions When Authentication Error" in the Administrator Settings is set to Mode 2 and
an incorrect password is entered the specified number of times, it is no longer possible to log in to the
administrator mode. For details on the Prohibited Functions When Authentication Error parameter, refer
to the "User's Guide [Copy Operations]".
- The password input page varies depending on the settings configured on the machine.
13-10
Login and Logout 13.2
d-Color MF651/551