My Panel Acquisition Procedure; Restrictions On Using The My Panel Function - Olivetti d-Color MF551 Function Manual

8
8.1.2

My Panel acquisition procedure

Perform user authentication on the selected MFP. If the user authentication is succeeded, the MFP
automatically accesses the server to obtain My Panel of the user who is logged in.
The user can use My Panel while logged in to the MFP. My Panel is not available after the user logs out.
8.1.3

Restrictions on using the My Panel function

The following are restrictions on the use of My Panel.
- Only the user can register, edit, or delete My Panel. The administrator of the MFP cannot operate My
Panel.
- When My Panel is not customized, the settings of language, measurement unit, and color for the control
panel conform to the settings for the MFP.
- When My Panel is not customized, the initial screen of the control panel shows the My Panel main
menu.
- Only the setting memory (copy program and fax/scan program) registered on the MFP you use is
available.
- Depending on the functions or option installation status of the MFP on which My Panel is used, the
operating environment specified as My Panel may not be available.
- When registering, editing, or deleting My panel, an error may occur depending on the connection status
to the server. If an error occurs, check the network connection.
8-4
My Panel enabled
My Panel enabled
My Panel disabled
- Authentication failed
- Logged out
- Acquisition failed
Server (Monitor My Panel)
(3) Acquire My Panel
(1) Authentication
Overview
(2) Access server
d-Color MF651/MF551
8.1