Avaya IP Office H.323 Telephone Installation Manual page 62

HP Procurve CLI output
; J8164A Configuration Editor; Created on release #H.08.60
hostname "AvayaLabs"
snmp-server community "public" Unrestricted
vlan 1
name "Native"
untagged 1-2,4,7-26
ip address 192.168.202.201 255.255.255.0
no untagged 3,5-6
exit
vlan 209
name "Red [Voice]"
untagged 5
tagged 3
exit
vlan 210
name "Blue [Data]"
untagged 3,6
exit
gvrp
spanning-tree
The table below summaries the HP configuration for ports and VLANs.
Port VLAN 209 VLAN 210
Voice Data
3 Tagged Untagged
5 Untagged –
6 – Untagged
The operation of this network is dependant on the functionality defined in HP documentation. Specifically, HP refers to
this type of VLAN operation as Overlapping VLAN. The configuration relies also on that fact that Avaya 4600 IP Phones
support VLAN operation.
H.323 Telephone Installation
IP Office
Description
This port was added to both VLAN 209 and VLAN 210.
Note: When adding port 3 to VLAN 209 the Mode option must be tagged, but it
must be untagged when adding to VLAN 210.
This port is included only in VLAN 209 and not included in VLAN 210.
The Mode option must be set to Untagged for port 5 in this VLAN.
Port 6 is included only in VLAN 210 and not included in VLAN 209.
The Mode option MUST be set to Untagged in this VLAN.
15-601046 Issue 17e (Wednesday, November 14, 2012)
Page 62