System File Server Settings - Avaya IP Office H.323 Telephone Installation Manual

2.4.1 System File Server Settings

If the IP Office system is being used for
configuration are used to set the file server addresses sent to the phones in the DHCP responses.
1. Using IP Office Manager, retrieve the configuration from the system.
2. Select System.
3. Select the System tab.
4. Check the Phone File Server Type setting.
· Memory Card
Use the systems own memory card by providing its own IP address as the TFTP and HTTP file server values in
the DHCP response. This is the default setting.Manager
Use the IP Office Manager application as the TFTP and HTTP file server. This option is only supported for a
maximum of 5 IP phones. This option uses the separate Manager PC IP Address set in the configuration.
The default of 0.0.0.0 is used by the system to broadcast for any available IP Office Manager application on
the network.
· Custom
This option uses the separate TFTP Server IP Address and HTTP Server IP Address values set in the
configuration as the files server addresses in the DHCP response given to phones.
· The TFTP Server IP Address default of 0.0.0.0 is a broadcast on the network for a TFTP server.
· The HTTP Server IP Address default of 0.0.0.0 is no HTTP request.
5. The Avaya HTTP Clients Only option can be used to restrict the system to responding to file requests from
Avaya phones and applications only. This option should not be used if the system is also supporting 1100 and or
1200 Series phones.
6. If any changes have been made, save the configuration back to the system.
H.323 Telephone Installation
IP Office
DHCP support for the IP phones, various settings in the IP Office system's
33
15-601046 Issue 17e (Wednesday, November 14, 2012)
Page 38