Network Fax - Olivetti d-Color MF551 Operation Manual

Copy/print/fax/scan operation
Hide thumbs Also See for d-Color MF551:
Table of Contents

Advertisement

12
12.2.2

Network Fax

Description of
problem
Cannot receive
faxes
No printout pro-
duced
12-6
Check points
Corrective Actions
Is paper in the
If the add paper icon is lit, the machine is out of paper and re-
machine?
ceived documents are stored in memory. Add paper.
For the procedure for adding paper, refer to the "User's Guide
[Copy Operations]".
Is paper jammed
In case of a paper jam, received documents are stored in
in the machine?
memory. Remove the jammed paper.
For the procedure for correcting paper jams, refer to the "Us-
er's Guide [Copy Operations]".
Is the machine
No fax can be received if the toner is exhausted. Replace the
out of toner?
toner cartridge.
For the procedure for replacing the toner cartridges, refer to
the "User's Guide [Copy Operations]".
Is the network ca-
Check the network cable for connection and, if disconnected,
ble correctly con-
connect it securely.
nected?
Is the memory full
Check the remaining amount of memory or hard disk space. If
or does the hard
there is insufficient memory or hard disk space, the machine
disk lack suffi-
will fail to receive faxes or, if it receives faxes, will fail to print
cient available
them.
space?
Is Memory RX en-
If Memory RX is enabled, print the document received by fol-
abled?
lowing the procedure described below.
Press the [User Box] key.
Press [System User Box].
Press [Memory RX User Box], and then press [Use/File].
If a password has been configured, enter it and then press
[OK].
Select the document you want to print and then press
[Print].
Optionally, you can change the setting to disable Memory RX.
For details, refer to page 10-22.
Cannot receive faxes
d-Color MF651/551
12.2

Advertisement

Table of Contents
loading

This manual is also suitable for:

D-color mf651

Table of Contents