Admin Report Settings; Result Report Settings - Kyocera TASKalfa 2551ci Operation Manual

System Menu > Default Setting on the Machine (System Menu)
Item
Service Status
Optional Network Status

Admin Report Settings

Report
Configure settings for fax functions. For details, refer to the FAX Operation Guide.

Result Report Settings

Report
Item
Send Result Report
E-mail/Folder
1
FAX*
Canceled before
Sending
Recipient Format
1
FAX TX Resolution*
Job Finish Notice Setting*
1
RX Result Report Type*
*1 Displayed only when the optional fax kit is installed.
*2 This is not displayed if you selected [Off] for FAX RX Result Report.
Prints the service status. More detailed information is available than on the Status Page.
Service personnel usually print the service status pages for maintenance purpose.
Prints the optional network status, allowing you to check the information including optional
network interface firmware version, network address and protocol.
NOTE
This function is displayed when the optional Network Interface Kit is installed.
Admin Report Settings
Result Report Settings
Automatically print a report of transmission result when a transmission is complete.
Print a report of E-mail/Folder transmission results.
Value: Off, On, Error Only
For details, refer to the FAX Operation Guide.
Print a send result report when the job is canceled before being sent.
Value: Off, On
Select the Recipient Format for the send result report.
Value: Name or Destination, Name and Destination
For details, refer to the FAX Operation Guide.
1
For details, refer to the FAX Operation Guide.
2
For details, refer to the FAX Operation Guide.
*
Description
NETWORK STATUS PAGE
Description
8-37