Ohp Backing Sheet - Kyocera TASKalfa 2551ci Operation Manual

Using Various Functions > Functions

OHP Backing Sheet

When two or three OHP transparencies are stacked on top of each other, static electricity may make them difficult to
handle. When using OHP Backing Sheet, a paper sheet is automatically inserted between each transparency, making
them easier to handle. Also, the same original page can be printed to the backing sheet for multiple page printing.
NOTE
For transparency film that can be used, refer to
Never load OHP transparencies into trays or cassettes other than the multi purpose tray.
When OHP Backing Sheet is set, the multi purpose tray paper type is automatically set to "Transparency".
If the optional 1,000-Sheet Finisher is installed, you may need to specify the output destination for finished copies. For
details, refer to Paper Output on page
Blank Sheet
Outputs a blank backing sheet after printing to a transparency. (* denotes transparency.)
Copied Sheet
After printing to a transparency, copies the same original image to the backing sheet paper. (* denotes transparency.)
IMPORTANT
Fan through the transparencies before loading.
Up to 10 transparencies can be loaded at one time.
Be sure that paper of the same size and orientation as the transparencies is loaded in the cassette.
Item
Auto, Cassette 1 to 4
Blank Sheet,
Copied Sheet
Transparencies on page
6-21.
1
2
3
Original
1
2
3
Original
Value
6-60
11-17.
1
*
2
*
3
*
Copy
1
*
1
2
*
2
3
*
3
Copy
Description
Select the media to be fed. When [Auto] is selected,
the machine automatically selects media that matches
the size of the original.