Drum Removal/Roller/Glide Access - Maytag ADE7005AK Service Service Manual

Disassembly Procedures
!
Drum Removal / Roller / Glide Access
1. Disconnect power supply to unit.
2. Remove Top Cover and Front Panel, see "Top Cover /
Door Switch / Front Panel / Gasket Removal"
procedure.
3. Remove wires from light, see "Light Removal"
procedure steps 3 - 4.
4. Remove four screws on Front Bulkhead.
22
WARNING
To avoid risk of electrical shock, personal injury or death;
disconnect power to unit and shut off gas supply before
performing any disassembly procedure.
5. Remove belt from Idler Pulley.
6. Grasp the Drum with one hand and the belt with the
other. Lift the Drum and slide out the front. Carefully
spread the cabinet as needed to gain additional
clearance.
7. Rear Rollers and Glides can be serviced as needed.
16026315
©2006 Maytag Services