LG-Ericsson LDP-7008 D User Manual page 646

LIP-8050V User Guide
Individual CO/IP line
Access Code
88
88
CO/IP Group access—
CO/IP Group Access
Code
801 – 820
801 – 872
8001 – 8200
801 – 824
801 - 872
Any CO/IP Line access—
9
When dialing on a CO line which uses pulse style signals, you
may activate Dial Pulse to Tone Switchover changing to
DTMF style dialing (for banking services, etc.).
When placing an IP call, you must dial an IP address using the
'*' key in place of the dot.
If Least Cost Routing is set-up, the number you dial will be
analyzed and the system will place the call on the least
expensive route.
You may be assigned Dialing and/or CO/IP Line Access
Restrictions, in which case you will receive error tone if you
attempt to dial or access a restricted number/CO/IP line. CO/IP
line and Station Class Of Service (COS), which establish
dialing restrictions, may vary during Day and Night operation
(Day/Night COS).
You may need to enter an Authorization code before placing
calls, in which case you will receive a second dial tone.
Your external calls may be subject to Call Time Restrictions,
you will receive a Call Warning Tone prior to disconnect.
50
Line No System
01-42 iPECS-50 & 100
001-200 iPECS-300
001-400 iPECS-600
001-600 iPECS-1200
01-80 iPECS-MG100
001-240 iPECS-MG300
System
iPECS-50 & 100
iPECS-300 & 600
iPECS-1200
iPECS-MG100
iPECS-MG300