LIP-8008D User Guide
Mark and drill two (2) 7mm holes for plastic wall anchors.
Insert the two (2) anchors into the holes and insert and tighten
each screw leaving about 2.5 mm (1/8-inch) of the screw
exposed.
Slide the LIP-8000 phone over the screws and assure the
phone is secure.
NOTE—It may be necessary to remove the phone and tighten
or loosen the screws for a secure mounting.
For the wall-mounting, sleeve of the CAT5 cable should be
moved backward to prevent it protrude.
1.5.3 Wall Mount
The LIP-8000 series phones can be wall mounted as
needed. The following instructions detail how to perform
a wall mount installation:
5