LG-Ericsson LDP-7008 D User Manual page 401

LIP-8008D User Guide
Flex button on the iPECS Phone assigned as a
button lets you access a line from a group. Dial codes
for access to CO/IP lines are:
Individual CO/IP line access
88 + Line number (01-42 for iPECS-100, 001-200 for
iPECS-300 & 600, 001-600 for iPECS-1200).
or
88 + Line number (01-80 for iPECS-MG100, or 001-240
for iPECS-MG300).
CO/IP Group access
801-820 for iPECS-100, 801-872 for iPECS-300 & 600,
89001-89201 for iPECS-1200
or
801-824 for iPECS-MG100, or 801-872 for iPECS-
MG300
Any CO/IP Line access
9
When dialing on a CO line, which uses pulse style
signals, you may activate Dial Pulse to Tone
Switchover changing to DTMF style dialing for banking
services, etc.
When placing an IP call, you must dial an IP address
using the '*' key in place of the dot.
If Least Cost Routing is set-up, the number you dial
will be analyzed and the system will place the call on the
least expensive route.
You may be assigned Dialing and/or CO/IP Line
Access Restrictions, in which case you will receive
error tone if you attempt to dial or access a restricted
number/CO/IP line. CO/IP line and Station Class Of
Service (COS), which establish dialing restrictions, may
vary during Day and Night operation (Day/Night COS).
You may need to enter an Authorization code before
placing calls, in which case you will receive a second
dial tone.
Your external calls may be subject to Call Time
Restrictions, you will receive a Call Warning Tone
prior to disconnect.
19
LOOP