LIP-8012D & LIP-8024D User Guide
To place a call using Dial by Name:
Press DIR Soft button,
Dial the desired directory, 1: Private directory, 2:
Public directory, 3: Intercom directory, the LCD will
display the names in alphabetical order,
Scroll using the Navigation up/down keys, or enter
search characters (refer to the Character Entry Chart in
Section
Press
To enter your station user name:
Press the
Dial 74(iPECS-LIK)/12(iPECS-MG) (Station User Name
code),
Enter the Name, up to 12 characters (press DND
button to backspace/delete a character). To input
characters:
Press the second Soft button to select ABC> or abc>
mode,
To input the first character of a button, press the
button 1 time (ex., for 'a', press 2 button once),
To input the second character of a button, press the
button 2 times (ex., for 'b', press the 2 button twice.
To input the third character of a button, press the
button 3 times (ex., for 'f', press the 3 button three
times.
Press
4.3.4).
to place the call.
/
HOLD
SAVE
/
TRANS
PGM
.
/
HOLD
SAVE
4.3.6 Using Automatic Called Number Redial (ACNR)
When making an external call and a busy signal is
received, the system can be set to retry the number until
the call is connected, the feature is cancelled, or the
maximum number of retries is attempted—this is
Automatic Called Number Redial (ACNR).
For each retry, the system will activate your speaker
then place the call with the microphone muted. When
the remote end answers, you must select the M
button, or lift the handset. Either of these actions will
cancel the ACNR request as well as connect you to the
remote party.
button,
38
UTE