LG-Ericsson LDP-7008 D User Manual page 448

LIP-8012D & LIP-8024D User Guide
To access the Attendant menu:
 Press M
display:
Date/Time Set—Enter mm/dd/yy, and press OK Soft
button; enter hh/mm, and press OK Soft button.
Set ICM Only Mode—Dial the Station Range for ICM
only calls (ex., 103-108=103108), and press the OK
Soft button.
Restore COS—Dial the Station Range for COS
restoring (ex., 103-108=103108), and press the OK
Soft button.
Monitor Conference Room—Enter the Conference
Room number to view the number of attendees in the
Conference Room.
Delete Conference Room—Enter the Conference
Room number and press the OK Soft button to delete.
2.2 Using the Speakerphone
2.1.5 Attendant menu (iPECS-LIK)
The Attendant menu is only available on the System
Attendant phone.
button and 5 (Attendant); the following will
ENU
1. DATE/TIME SET
2. SET ICM ONLY MODE
3. RESTORE COS
BACK
4. MONITOR CONF ROOM
5. DELETE CONF ROOM
BACK
Activate the iPECS Speakerphone at any time (except
for Paging) in place of lifting the handset to receive or
place calls.
Additionally, you may switch between the handset and
Speakerphone during a call. By keeping the handset
Off-hook, the Group Listen feature is activated, which
provides incoming audio over the speaker with outgoing
audio from the handset. This permits a local 'group' to
listen to both sides of the conversation without
interfering with the conversation.
While in a conversation using the Speakerphone, Mute
the microphone using the M
active, the M
off Mute, press the M
OK
OK
UTE
button LED will be illuminated. To turn
UTE
button again..
UTE
11
button. When Mute is