Ddns; Misc - Digimerge DH200+ Series Instruction Manual

DDNS

Configure Digimerge DDNS settings.
You must register for the FREE
NOTE:
Digimerge DDNS service prior to
configuring DDNS settings.
Figure 18.2 DDNS menu
To configure DDNS settings:
1. Under USE, select
2. Under DOMAIN NAME, enter only the first
portion of your DDNS domain from the
confirmation email. For example, if your
domain name is tomsmith.digimerge.net,
you only need to enter
field.
3. Under USER ID, enter your
.
user name
4. Under PASSWORD, enter your
.
DDNS password
Obtain your Digimerge DDNS user
NOTE:
name and password from the confirmation
email.
5. Under DDNS TEST, select
successful, you will see "GOOD." If
unsuccessful, you will see "ERROR." If you
receive an error, please check your
network connections and carefully
re-enter your Digimerge DDNS
information.
6. Press to save your settings. Press
ENTER
to close remaining windows.
CANCEL/ESC
or .
DIGIMERGE OFF
tomsmith in the text
Digimerge DDNS
Digimerge
. If
START

MISC

Configure additional network settings.
Figure 18.3 MISC menu
To configure bandwidth settings:
1. Under BANDWIDTH, select
, ,
KBPS 256 KBPS 512 KBPS
, , or
4 MBPS 8 MBPS
By default, the system is set to
NOTE:
UNLIMITED. Change the bandwidth setting
to maximize your network performance.
2. Press to save your settings. Press
ENTER
to close remaining windows.
CANCEL/ESC
Connecting to your system
After you have port forwarded the required
port, created a DDNS account, and enabled
DDNS on your system, you must enter the
DDNS URL into Internet Explorer to access
your DVR.
The DDNS URL must include http:// , the
name of your DDNS URL, followed by a
colon, then the port number of your DVR.
For example:
http://tomsmith.digimerge.net:80
DDNS URL
NOTE: If you change your default port
number (port 80) to a different port, you
still need to enter your port number after
the DDNS address.
Using the Main Menu
,
64 KBPS 128
, ,
1 MBPS 2 MBPS
.
UNLIMITED
Port Number
,
33