0-10V Bms Interface & Common Fault Module Em10 - Buderus Logamax plus GB162 Applications Manual

2 2 |
GB162 Applications Manual
2.6 0-10V BMS Interface & Common Fault Module EM10
The EM10 Module allows interfacing a single boiler with a
Building Management System (BMS) for temperature or output
setpoint control. The EM10 also has a dry set of N/O and N/C
contacts that can be used to trigger a system alarm.
Features of the EM10:
• Run single boiler based on BMS input 0-10V signal for
temperature or output setpoint control
• Input: 0-10V
• Common fault dry contact output NO/NC
• 120V supply
Fig.16 EM10 0-10V BMS Interface Module
Logamax plus GB162 applications manual | 03.2013
Technical specifi cations are subject to change without prior notice