Buderus Logamax plus GB162 Applications Manual page 19

GB162 Applications Manual
2.5.6 Mixing Module MM10 Wiring Diagram
Fuse
5 AT
14AWG
120 V 60Hz
Main power
120 V 60Hz
2) Valve actuator
motor
run time:
Logamax plus GB162 applications manual | 03.2013
- + - +
14AWG, 14AWG,
18AWG
Max. 5A Max. 5A
System
supply
Notes:
Polarity matters on EMS/RC bus: Connect 1 to 1 and 2 to 2.
Implement the installation, fuse protection, main isolator,
emergency stop switches and safety measures in accordance with
local/national regulations.
Warning! Ground yel/grn must not be used as a control line.
Ensure phases are connected correctly.
1) Requires 120V mixing valve with 3-point floating actuator.
Maximum current: 5A
2) Hot: increase hot water delivery to zone
Cold: decrease hot water delivery to zone
120
L
18AWG 18AWG
Technical specifi cations are subject to change without prior notice
| 19