Sanyo PLC-XT35 Service Manual page 42

Optical Parts Disassembly
29
Polarized glasses(GB) removal.
1. Remove the Polarized glasses(GB) upward.
30
-1 optical base top removal-1.
1. Remove  screws-A(T3X10) and remove the Stopper lens.
Black Marking
Polarized glass(GB)
Fig.29
Stopper lens
-4-
Note on Polarized glass handling
When replacing the polarized
glass(GB), you must ware the clean
glove and do not touch the glass
face. Mount them as the black marker
comes top side as shown in the figure.
A
A
Fig.30-1