Sanyo PLC-XT35 Service Manual page 30

Mechanical Disassembly
16
-1 Intake Fan(FN904,FN905)removal-1.
1. Pull out air filter base ass'y.
. Remove 5 screws-A(T3X8) and remove the intake duct ass'y.
Filter base ass'y
16
-2 Intake Fan(FN904,FN905)removal-2.
1. Remove 1 screw-A(M3X6), the Shield plate-A and remove the Shield plate-B.
A
A
Shield plate-B
-30-
A
A
A
Intake duct ass'y
A
Shield plate-A
thermistor(tH901)
Intake duct
Fig.16-1
Fig.16-2