Philips Q552.2L Service Manual page 51

Main Menu Sub-menu 1
Alignment White point
Ambilight
Dealer options Virgin mode
E-sticker
Auto store mode
Option numbers Group 1
Group 2
Store
Initialise NVM
Store
Operation hours display
Software maintenance Software events
Hardware events
Test setting Digital info
Install start frequency
Install end frequency
Default install frequency
Installation
Development file Development 1 file version
versions
Development 2 file version
Upload to USB Channel list
Personal settings
Option codes
Alignments
Identification data
History list
All (options included)
Alignments
Sub-menu 2 Sub-menu 3
Colour temperature Normal
Warn
Cool
White point red
White point green
White point blue
Select module
Brightness
Select matrix
Off/On
Off/On
None
PDC/VPS
TXT page
PDC/VPS/TXT
e.g. "00008.00001.15421.02239"
e.g. "44816.34311.33024.00000"
0003
Display
Clear
Test reboot
Test cold reboot
Test application crash
Display
Clear
Current frequency: 538
QAM modulation: 64-qam
Symbol rate:
Original network ID: 12871
Network ID: 12871
Transport stream ID: 2
Service ID: 3
Hierarchical modulation: 0
Selected video PID: 35
Selected main audio PID: 99
Selected 2nd audio PID: 8191
000
999
Digital only
Digital + Analogue
Display parameters DISPT5.0.9.29
Acoustics parameters ACSTS
5.0.6.20
PQ - TV550 1.0.27.22
PQS- Profile set
PQF - Fixed settings
PQU - User styles
Ambilight parameters PRFAM 5.0.5.2
12NC one zip software
Initial main software
NVM version Q55x1_0.4.5.0
Flash units software
Temp com file version none
back to
div. table
Q552.2L LA 6.
Description
3 different modes of colour temperature can be
selected
LCD White Point Alignment. For values,
see Table 6-3 White tone default setting 32" sets
(Blockbuster)
Select Virgin mode On/Off. TV starts up / does not
start up (once) with a language selection menu after
the mains switch is turned "on" for the first time (virgin
mode)
Select E-sticker On/Off (USP's on-screen)
The first line (group 1) indicates hardware options 1
to 4
The second line (group 2) indicates software options
5 to 8
Store after changing
N.A.
Select Store in the SAM root menu after making any
changes
In case the display must be swapped for repair, you
can reset the ""Display operation hours" to "0". So,
this one does keeps up the lifetime of the display
itself (mainly to compensate the degeneration
behaviour)
Display information is for development purposes
Display information is for development purposes
Display information is for development purposes
Install start frequency from "0" MHz
Install end frequency as "999" MHz
Select Digital only or Digital + Analogue before
installation
Display information is for development purposes
Display information is for development purposes
To upload several settings from the TV to an USB
stick
EN 51
2012-Mar-16