EN 24
4.
Q552.2L LA
4.5.8
LCD Panel
Refer to
Figure 4-31
and
4
4
1. Remove the SSB as described earlier.
2. Remove the PSU as described earlier.
3. Remove the tweeters with their subframes and subwoofer
as described earlier.
4. Remove the stand and -support as described earlier.
5. Remove the cables [1].
6. Remove the stand subframe [2].
7. Remove the mains switch subframe [3].
8. Remove the Ambilight units together with their subframes
as described earlier.
9. Unplug the connector from the keyboard control-, and IR &
LED board as described earlier.
10. Remove all remaining cables and subframes.
11. Use a screwdriver to release the clamps [4] that secure the
panel and take the panel out.
Remove the clamps from the panel before sending the panel in
for Service.
2012-Mar-16
Mechanical Instructions
Figure 4-32
for details.
4
Figure 4-31 LCD panel [1/2]
4
2
2
2
1
2
2
4.6
Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
Notes:
•
While re-assembling, make sure that all cables are placed
and connected in their original position.
•
Pay special attention not to damage the EMC foams in the
set. Ensure that EMC foams are mounted correctly.
back to
div. table
4
4
Figure 4-32 LCD panel [2/2]
4
4
19100_055_110216.eps
110216
19100_056_110217.eps
110217