Superimpose - JVC HR-J6006UM Instructions Manual

18
EN
MENU
To recall an indication
1
Press – –:– –.
All indications corresponding to the current status are
displayed for 5 seconds. After that, the counter
information and RECORD/PAUSE if in the Record
Pause mode, are left displayed on the screen.
2
Press – –:– – again to clear the display.
The RECORD/PAUSE indication is left displayed on
the screen.
The superimposed indication on the TV screen tells you what the VCR is doing.
Tuned-in channel or AUX(iliary) mode
When the channel is changed, the new
channel is displayed on the screen for 5
Stereo program indication
Second Audio Program indication
Audio mode indications (HR-J6006UM only)
Downloaded from: https://www.usersmanualguide.com/
PLAYBACK AND RECORDING FEATURES (cont.)
1 2 3
2
4 5 6
8 9
7
0
4
1
OK
seconds.
Clock time
(HR-J6006UM only)
(HR-J6006UM only)
Tape position indicator

Superimpose

This function, switchable between ON and OFF, determines
whether or not operational indicators will appear on screen.
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS FUNCTION SET
SCREEN
2
Move the highlight bar (arrow) to "FUNCTION SET" by
pressing CH5∞ or % fi, then press OK or
SELECT SUPERIMPOSE SET
MODE
3
B.E.S.T.
PICTURE CONTROL
AUTO TIMER
=SUPERIMPOSE
AUTO SP = EP TIMER
VIDEO STABILIZER
NEXT PAGE
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
Move the highlight bar (arrow) to "SUPERIMPOSE" by
pressing CH5∞ or % fi, then press OK or
the desired mode:
a– Select "ON" if you want the superimposed opera-
tional indications on the TV screen.
b– Select "OFF" if you do not want the superimposed
operational indications on the screen.
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTES:
● If you engage the Record Pause mode, RECORD/PAUSE is
displayed regardless of the Superimpose mode setting.
● If you select a channel on which no signal is received, the
channel number is displayed regardless of the Superimpose
mode setting.
● Each time you press – –:– – , the indication on the front
display panel will also change as follows: counter reading =
channel number = clock time. (Channel number is not
displayed during playback.)
CH 125 RECORD
THU 12:00 AM PAUSE
STEREO ] SP
SAP
+ + +
B E
INDEX-1
NORM
HI–FI COUNT –1:23:45
Counter reading
HR-J6006UM HR-J4406UM
FUNCTION
ON B.E.S.T.
AUTO PICTURE CONTROL
OFF AUTO TIMER
ON
=SUPERIMPOSE
OFF AUTO SP = EP TIMER
VIDEO STABILIZER
ON
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
Operation mode
When the operation mode is changed,
the new mode is displayed — RECORD
(5 sec.), PLAY (5 sec.), FF/REW (5 sec.
when engaged from Stop mode),
RECORD PAUSE (for as long as Pause is
engaged), and ITR *:** (5 sec.).
Tape speed indication
"Cassette Loaded" mark
When a cassette is loaded, the mark is
displayed for 5 seconds. It blinks when the
VCR's EJECT button is pushed.
INDEX indication
.
FUNCTION
ON
AUTO
OFF
ON
OFF
ON
to select